Turn Off Frp Samsung J327
Turn Off Frp Samsung J3 Pro

Being an entry-level device, we can expect that the Samsung Galaxy J3 may not be able to compete with the company’s flagships especially when it comes to performance. In fact, it is almost expected that after a few months of use, the device’s performance may slowly deteriorate until you did something about it.

Press the volume up to continue. Step 3: Now connect your device with a USB cable to the PC. Step 4: Then install and open the tool and from the support options, you must choose the Samsung device model. Step 5: After that, you need to click the Reset FRP option. Step 6: After a few seconds, the process is complete. I used a USB on the go cable with a Samsung Galaxy J3 Luna Pro. With that cable my USB flash drive was easily accessed by my phone. I copied the Samsung FRP tool to the phone with the OTG cable and flash drive. However this tool won't bypass FRP on the J3 Luna Pro. This phone is.not. in the list of phones. Samsung Galaxy Grand Prime SM-G531H, SM-G531F, SM-G530FZ Samsung Galaxy Core Prime VE SM-G361H Samsung Galaxy J2 SM-J200F, SM-J200G, SM-J200GU, SM-J200H Samsung Galaxy J3 SM-J320F Samsung Galaxy J5 SM-J500F, SM-J500FN, SM-J500G, SM-J500H Samsung Galaxy J7 SM-J700F, SM-J700H Samsung Galaxy A8 SM-A800F Samsung Galaxy S5 SM-G900F, SM-G900H, SM-G900FD.

In this post, I will tackle the issue involving the Galaxy J3 that keeps restarting on its own for no apparent reason. We have to look into the possibilities why this is happening and we have to rule them out one by one until we will know what the problem is all about. Once we have that information, we can formulate a solution that might fix the problem for good and prevent it from happening again in the future, so continue reading below.

Before we jump right into our troubleshooting, if you have other issues, drop by our Galaxy J3 troubleshooting page for we have already addressed many issues with this phone since we started supporting it. Try to find problems that are similar with yours and use the troubleshooting procedures or solutions we suggested. Should you need further assistance from us, fill up our Android issues questionnaire and hit submit. Don’t worry, it’s free.

Step-by-step guide to troubleshooting Galaxy J3 that keeps restarting

Problem: Hello guys. Just dropping by to see if you can help me with my problem. My phone is a J3 and I bought it brand new and I’ve taken care of it since day. Recently, however, it started to restart on its own. At first, it felt like it was just a glitch then it became daily and now it restarts many times a day and I’m sure you know how annoying that could be. Is there something I can do to fix this? Thanks in advance.

Troubleshooting: More often than not, frequent reboots initiated by the device are linked to a firmware issue. However, there are also other possibilities that may point to a different direction that’s why it’s necessary to troubleshoot your phone to know what exactly is the problem with it. In this case, this is what you have to do:

Step 1: Make sure it isn’t a battery issue

Constant reboots are often a sign of a failing battery because the power source is no longer stable. The good news is your J3 has a removable battery so you can actually check it physically to see if its form, somehow, shows abnormalities like lumps or leaks. So, in this step, this is what I want you to do:

Remove the back cover and pull the battery out.
Physically check for any signs of leaks.
On a level surface, place the battery and flick it to see if it rotates freely, if so, then it has developed a lump and needs to be replaced. Do the same for the other side.
If everything looks good, place it back in and then turn the phone on.
Charge the device to see if it responds normally and shows the usual charging signs.
Let the phone finish charging and then continue to observe if it still reboots even with a full battery.
Be mindful of the percentage of the battery when it starts to reboot because if its performance changes when the battery percentage drops, it’s a battery issue.

Assuming there’s no problem with the battery and the phone charges fine, then move on to the next step.

Step 2: Restart your J3 in Safe mode and observe

We are still in the observation stage and booting in safe mode is necessary so that we can easily isolate if the problem is caused by one of the third-party apps or not. When in safe mode, all third-party elements are disabled, so naturally, if the problem is caused by them, the reboots won’t occur in this mode. This is how you start your Galaxy J3 in safe mode:

Turn the device off.
Press and hold the Power key past the screen with the device name.
When ‘SAMSUNG’ appears on the screen, release the Power key.
Immediately after releasing the Power key, press and hold the Volume down key.
Continue to hold the Volume down key until the device finishes restarting.
Safe mode will display in the bottom left corner of the screen.
Release the Volume down key when you see ‘Safe Mode’.

This observation may last a day but continue using your phone while in this mode to know if it still reboots and if so, then you have to move on to the next step. However, if the phone can last a day without a reboot in this mode, then it’s one of some of the third party apps that’s causing the problem. You need to find those apps and uninstall them. You may have to uninstall more than one app and reboot your phone countless times to confirm if the problem still occurs.

Here’s how you uninstall an app from your J3:

From any Home screen, tap the Apps icon.
Tap Settings.
Tap Applications.
Tap the desired application in the default list or tap Menu icon > Show system apps to display pre-installed apps.
Tap Uninstall.
Tap Uninstall again to confirm.

Step 3: Delete the system caches so they’ll be replaced

There are also cases wherein some of the system caches get corrupted and when it happens, various performance issues may occur including this one. So, to go about it, you have to delete those caches so that they will be replaced with new ones. Here’s how…

Turn off the device.
Press and hold the Volume Up key and the Home key, then press and hold the Power key.
When the device logo screen displays, release only the Power key.
When the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
Press the Volume down key several times key to highlight ‘wipe cache partition’.
Press the Power key to select.
Press the Volume down key to highlight ‘yes’ and press the Power key to select.
When the wipe cache partition is complete, ‘Reboot system now’ is highlighted.
Press the Power key to restart the device.

After this procedure, you have to continue your observation and if the reboots still happen, the next step is necessary.

Step 4: Backup important files and reset your phone

Turn Off Frp Samsung J327

We are now at the stage wherein we have to know if this is a firmware or a hardware problem. A reset is necessary because